DIE CUTTING AND PERFORATION

ELECTRONIC ADJUSTABLE ANVIL DIE STATION

  • Rotary die cutting group.

  • Tecnocut “EDiffsystem” precision electronic system with micrometric adjustment of the height of the Anvil roller from each side.

  • GTU integrated software.

  • Set up of the die cutting parameters can be saved in the central HMI for fast change over.

  • Hydraulic load cells for pressure control.

  • Sensor to register the pre-printed material.

FAST CHANGE OVER ADJUSTABLE ANVIL DIE STATION

  • Fast shift rotary die-cutting group with.

  • Dual position carriage for the infeed and outfeed of the magnetic cylinder.
    No crane needed for magnetic cylinder change over. Fast and Safe.

  • Tecnocut “EDiffsystem” precision electronic system with micrometric adjustment of the height of the Anvil roller from each side.

  • GTU integrated software.

  • Set up of the die cutting parameters can be saved in the central HMI for fast change over.

  • Hydraulic load cells for pressure control.

  • Sensor to register the pre-printed material.

STANDARD DIE CUTTING STATION

  • Rotary die cutting group.

  • Hydraulic load cells for pressure control.

  • The group is driven by an independent servo.

  • Sensor to register the pre-printed material.

CONTACT MATRIX STRIPPING SYSTEM

  • Servo motor driven rewinding roller.

  • Contact stripping.

  • Waste matrix break detector.

  • Integrated in GTU´s central HMI.

DIE CUTTING AND PERFORATION

ELECTRONIC ADJUSTABLE ANVIL DIE STATION

  • Rotary die cutting group.

  • Tecnocut “EDiffsystem” precision electronic system with micrometric adjustment of the height of the Anvil roller from each side.

  • GTU integrated software.

  • Set up of the die cutting parameters can be saved in the central HMI for fast change over.

  • Hydraulic load cells for pressure control.

  • Sensor to register the pre-printed material.

FAST CHANGE OVER ADJUSTABLE ANVIL DIE STATION

  • Fast shift rotary die-cutting group with.

  • Dual position carriage for the infeed and outfeed of the magnetic cylinder.
    No crane needed for magnetic cylinder change over. Fast and Safe.

  • Tecnocut “EDiffsystem” precision electronic system with micrometric adjustment of the height of the Anvil roller from each side.

  • GTU integrated software.

  • Set up of the die cutting parameters can be saved in the central HMI for fast change over.

  • Hydraulic load cells for pressure control.

  • Sensor to register the pre-printed material.

STANDARD DIE CUTTING STATION

  • Rotary die cutting group.

  • Hydraulic load cells for pressure control.

  • The group is driven by an independent servo.

  • Sensor to register the pre-printed material.

CONTACT MATRIX STRIPPING SYSTEM

  • Servo motor driven rewinding roller.

  • Contact stripping.

  • Waste matrix break detector.

  • Integrated in GTU´s central HMI.